All products

Pads for clamping device M125-xxx and valving machine M103-xxx.Supplied in a set of 2 pcs. - Soft rubber. Size: 80X100X12 mm. Material: Rubber N...

Pads for clamping device M125-xxx and valving machine M103-xxx. Supplied in a set of 2 pcs. - The pads are made of Polyurethane, which is non-marki...

Wide range, replace both model No. M125-125-000 and M125-126-000.Supplied complete with compressed air cylinder, hose, hand operated compressed air...

The cylinder is clamped with a screw with parallel threads and a crank. The clamping device is operated by hand, and no tools or compressed air are...

Support for free standing installation of a manual clamping device. To be used with the manual clamping device M125-296-000 MECHANICAL / MANUAL CLA...

The cylinder is clamped in horizontal position with a screw with parallel threads by means of a crank. Operated by hand, no tools or compressed air...

The clamping device is designed to hold and turn small cylinders with a diameter of 100-140 mm and a weight of up to 20 kg. - Supplied with 2 hand ...

Self-centering model, the gas cylinder will always be clamped in the centre of the clamping device. The gas cylinder will be aligned with the valvi...

Additional fitting for standard clamping device M125-xxx. To be used when clamping composite cylinders, aluminium cylinders, and welded cylinders. ...

Support for free-standing installation of a clamping device.Clamp height as standard: 400 mm (can be adapted as per special requirements). Optional...

Rubber diaphragm for clamping device M125-xxx and valving machine M103-xxx. Spare part for clamping device/valving machine and thrust cylinder ME12...

Valve Wrench old type, supplied as spare part. To be used with replaceable inserts M131-131-118 and M131-131-117

The wrench is made to fit one valve only, no replaceable inserts, supplied complete with half ball joint. Manufactured according to sample valve or...

This wrench is made to fit Altop valves only. No replaceable inserts, supplied complete with half ball joint. It is provided that the valve is fitt...

Valve wrench for valves with handles (for fire extinguishers).

To remove threaded plastic tulip caps / valve guards. Clip-on tool to be used with standard Ronning valve wrench.The tool can only be used to remov...

The wrench is made to fit one valve only, no replaceable inserts, supplied complete with half ball joint. Manufactured according to sample valve or...

Spare valve jaw for Ronning Valve Wrench M131-729-001.Inserts with gap of spanner up to 40 mm are available.

To insert valves by hand. When the preset tightening value is reached, this can be clearly heard and felt. Torque range: 40–340 Nm. You can find mo...

Valve wrench with torque limiter for tightening only. This torque limiter must be used for cylindrical threads and small conical threads and when t...

Valve wrench with torque limiter for tightening only. This torque limiter must be used for cylindrical threads and small conical threads and when t...

Ronning standard Valve Wrench to be used with any Ronning valving machine.Designed for valves with low wrench grip. Optional fittings Valve jaw -...

Will automatically hold the punch perpendicular to the surface of the gas cylinder. This results in a better impression. For example, an "8" will n...

The fibre optic inspection cold light with LED is designed for examining the internal condition of gas cylinders Supplied with: Light source and g...